ZWave Commander - iPhone/iPad/iPod/Android ZWave Controller

Melloware provides creative and useful software

ZWave Commander is an ZWave Controller Client for the iPhone/iPod/iPad/Android and is a native iPhone application that allows you to control your ZWave devices anywhere in the world. Ever wanted to set your thermostat when you are away from home? How about turn the outdoor floodlights on but didn't feel like walking back downstairs to turn them on? Now you can! All you need is an ControlThink USB ThinkStick device connected to your PC and ZWave Commander will allow you to control all your ZWave devices. ZWave Commander consists of two pieces...a server piece which runs on your PC and the client piece which runs on your iPhone or iPod Touch. The server piece included here is called ZWaveCommander.exe and is critical to using ZWave Commander on the iPhone.

The purpose of this program is simple: to allow control of your ZWave devices from your iPhone/iPod/iPad/Android with the touch of a finger.

Requirements

iPhone/iPod Touch/iPad Client: iPhone OS 3.0 or Higher
Google Android Client: Lightswitch app on Android 2.0 or Higher
WI-FI/3G/Edge Internet Connection
Windows PC Support: Microsoft .NET Framework 2.0 or higher, ControlThink USB ThinkStick hardware device hooked up to your PC, ZWave Commander Server running. Just run this EXE and configure it and leave it running.
Native Hardware Support: Qhorus QHOR_ZWX10BR low voltage hardware-only solution not requiring a PC.
See the QuickStart Guide for instructions on getting set up and Connection Issues FAQ if you have any problems

Why use ZWave Commander iPhone Client?

Control your ZWave devices, scenes, zones from your iPhone/iPod/iPad/Android anywhere in the world
No special expensive ZWave remote needed.
You are already using ZWave Devices and already own an iPod or iPhone so now you can take it to the next level.
Costs less than 1 ZWave Module or Appliance!

What does it look like?

The desktop application is used to configure the Port and Password.

Growl Notifications if you use Growl For Windows.

Below are screenshots from both Apple iPhone and Google Android devices.


From the device you will see your devices and be able to turn them on or offor dim the lights!


From the Settings application on the device just enter the IP Address and Port of the Lightswitch server you want to connect to.


From the device you will see your zones and be able to turn them on or off.


You will also be able to set your thermostat devices.


The info window just gives you some details about Lightswitch Client. Find our Support forums or website.